Aspire Nautilus GT Kit | Troubleshooting

Need help troubleshooting your Aspire Nautilus GT vape device?

If you own the Aspire Nautilus GT kit, this page will assist you to troubleshoot many of your potential problems.  Here are some of the most common issues with the Aspire Nautilus GT kit and ways you can troubleshoot them.

My Aspire Nautilus GT Kit  is not firing when I push the button

The most likely culprit to your Aspire Nautilus GT kit not working when you push the button is that it is locked. To unlock your vape, push the fire button 5 times quickly to unlock.  Once it is unlocked, the screen will state “unlock” and it will be good to go.

The other simple issue is that the battery is dead or not installed at all.  The Aspire Nautilus GT kit requires a single 18650 battery (which is often not included in the purchase price) so first verify that your Nautilus GT has a battery installed.    The Aspire Nautilus GT uses a USB-C plug to charge, so if there is a battery installed, it may be dead. Simply plug the unit into a charging area using the supplied micro USB cord.  If you have an external 18650 battery charger you can also remove the battery at the bottom by twisting the base of the device counter clockwise.   The battery will charge typically within 60-120 minutes depending on the size.

My Aspire Nautilus GT Kit is leaking

If your Nautilus GT is leaking there are a few things that should be looked at in order to stop the leaking.   Here are the most common issues that could cause your tank to leak.

A) Coil Missing or Misaligned:  Sometimes from the factory the Nautilus GT tank coil is not screwed in correctly to the tank.  Remove the top of the tank and remove the coil by unscrewing counter clockwise and then re-install the coil ensuring it threads evenly.

B) Missing Coil O-Ring:  Near the bottom of the coil there should be an O-ring – typically either white or blue depending on the coil.  If this is missing, old/cracked, or not sitting tightly to the coil, it could cause e-liquid to leak from the bottom of the coil onto your battery.  Ensure this coil is aligned properly on your coil when installing it into your tank.

B) Cracked glass:  If your Nautilus GT was dropped, or if it was in a pocket or purse that got bumped around a lot, it’s possible for the glass to have broken. Even if you do not see a crack, if the leak is coming from near the top, it is possible that the glass has been cracked. Glass can also crack in your Nautilus GT if it is left below freezing temperatures for a period of time. It is important to never leave your vape in a car that’s freezing.  The good news is that the Nautilus GT comes with a second glass piece in the kit.  You can remove the glass by unscrewing the top of the device and sliding the old glass out.  *be careful if the glass is cracked to avoid pieces of glass cutting you!!*

C) Over Filling:  Overfilling your tank is the most likely reason for it to leak. It’s best to leave a little bit of space at the top of your tank and not over-fill it.

D) Drawing Too Quickly:  If you take very fast, hard draws off just about any vaping device, including the Nautilus GT, your device can be prone to leaking.  Vaping devices use the power of your inhale to pull e-liquid to the heating coils and mix with the vapour.  If you pull very long and hard on the device it is possible for some e-liquid to be pulled into the airflow chambers.  For all types of vaping, slow, long drags are recommended.

E) Device Sitting For Too Long:  You should never store any vaping device filled with e-liquid.  Over time the e-liquid will saturate your coil and begin to leak.  If you are not planning on using your device for more then 24 hours be sure to empty all e-liquid.

F) Flying:  The increased pressure of flying will make all vaping products leak; even the Aspire Nautilus GT.  It is best to empty all vaping devices before flying on a plane.

G) Over Heating:  If you leave any vape in a vehicle in the summer, especially in direct sunlight, it could leak.  Over heating the device can cause the e-liquid to expand pushing it out through the o-rings or through the airflow holes.

H) Freezing:  Leaving your device in a vehicle or any area under the freezing temperature could cause it to leak.  This is because some parts are plastic that can become brittle and are then susceptible to breaking under freezing temperatures.  The ideal temperature for any vaping device is +10 to +25 degrees Celsius.

Buy your Aspire Nautilus GT Kit today from Canada Vapes!  Sold in Canadian dollars, shipped from Canada same day at the lowest prices in Canada.  We even supply a free 30ml bottle of e-liquid!  Or you can review all of our Vape Kits HERE.

Do you have any additional troubleshooting tips or problems with your Nautilus GT Kit?  If so, please contact us and we would be happy to help you and add your issue to our Nautilus GT kit Troubleshooting Guide!